Greater RCC Manchester

the best laser cutting machine

Is CO2 laser cutting now obsolete?


The last doable reason to shop for a carbonic acid gas optical device cutting machine particularly to method thicker materials economically has been removed, consistent with Jon until, joint owner of correct optical laser device Cutting.

Optical Device

Having used optical device cutting machines since 1999, Jon until contends that the dying of carbonic acid gas is nigh, with fiber holding various benefits over carbonic acid gas optical device cutting regarding magnified machine convenience and productivity, lower running prices and bigger skillfulness. Till has used optical device cutting machines since 1999, once the corporate he was involved bought a Bystronic BySprint three-kilowatt carbonic acid gas model, fleetly followed by four kilowatts and four.4 kilowatt versions, and therefore the 1st half dozen kilowatt machine in 2002.

June 2015 saw the introduction of fiber optical device cutting with the installation of a half dozen kilowatt BySprint Fiber with 4m x 2m capability at the Old bury-based correct optical device Cutting. one0|a ten} kilowatt ByStar Fiber for process sheet up to 3m x 1.5m has recently been value-added in Gregorian calendar month 2016 – reportedly the primary machine of such high power to be put in within the kingdom.

Higher Power Optic

According to until, half dozen kilowatt is that the sensible limit for carbonic acid gas optical device cutting, as higher power would burn the optics. Even power sources below this limit take their toll on the lenses and mirrors during a machine, he noted, resulting in the frequent period to wash them, dear periodic replacement and production stoppage whereas maintenance is dole out.

CO2 optical device machines can even be tough to keep up, not solely because of the condition of the optics, however conjointly the tendency of the optical path to manoeuvre out of alignment, necessitating long correction if the quality is to be maintained. Till conjointly bemoaned the very fact that one will pay hours distinctive a haul with a carbonic acid gas optical device cutting machine once quality or speed of cut declines, with difficulty probably about management parameters, lenses, mirror alignment or the purity of the assist gas.

Price for the Machine

The machine running prices can even be considerably lower, as electricity consumption is around an hour less for a fiber machine, and there’s no have to be compelled to use tear gas, argonon and dioxide as optical device assist gases. Open days prevailed Gregorian calendar month fifteen – sixteen, 2016 at correct optical device Cutting’s Old bury facility to launch the supply of its new fiber optical device cutting capability, the ten-kilowatt ByStar 3015 Fiber – image courtesy of Bystronic kingdom.

Open days prevailed Gregorian calendar month fifteen – sixteen, 2016 at correct optical device Cutting’s Old bury facility to launch the supply of its new fiber optical device cutting capability, the ten-kilowatt ByStar 3015 Fiber – image courtesy of Bystronic kingdom. Our new ten-kilowatt ByStar Fiber cuts 1mm low-carbon steel at sixty m/min, quicker than our recent carbonic acid gas optical device was ready to position its head (50 m/min) to start out cutting. The speed and thus productivity advantage once process diluent sheet is around three-times, reducing for thicker materials.


A fiber optical laser device Cutting will cut everything that a carbonic acid gas optical device will method and a lot of quicker within the case of diluent gauges. It’s conjointly ready to tackle away wider kind of materials excellent for a subcontracting setting.

Why Practice Makes Perfect with a Laser Cutter

Thinking about buying a laser cutter? It’s one of the most utilized and flexible machines found in modern shops today.  Cutting materials with a laser cutting machine is not only easy but extremely fast and more are now thinking about using this than ever before. However, a lot of people don’t really know what they’re doing with this machine and end up with a lot of trouble on their hands. The problem is a lot of people think practicing before they use the machine is wasteful and that as long as they know how to operate the machine, they should be fine. That is not only a dangerous mindset but potentially deadly! Practice is a necessity today.

You Could Have an Accident

Let’s say you have just bought your cutting machine and are using it for the first time, do you know what you’re doing? Most people will skim through the instructions but aren’t sure what they’re doing. That could result in a terrible accident and it’s not what you want. Using a CO2 laser cutter machine can be easy but only when you know how to use the machine safely and when you’ve put in some practice hours too. Practice makes perfect! When you have some practice hours under your belt you shouldn’t have too much trouble and really it’s the best method to say the least when it comes to using a laser cutting machine.  When you become proficient you will be able to laser cut and engrave all kinds of material.  I just recently found a laser engraved wood stock!

When you know what you’re Doing, Everything Is Easier

There is a lot more confidence when you’ve practiced up with your laser cutter.  Even as a DIY you need time to get acclimated with your machine what is more, you can use the machine more effective too and that makes a real difference. When you don’t practice with the machine and use it for something important, you can make a lot of mistakes. Using the machine can be a lot easier when you know what you’re doing and that is going to make all the difference to say the least. Laser cutting machines can be easy to use when you put in some practice. You can easily set aside some time to practice and get a feel for how the machine works.

Practice Makes Perfect

When you have some practice under your belt you will know how to handle the machine and how to safely use it. Far too many people don’t take a little time out to practice using the machine and end up getting hurt or breaking the machine. This isn’t what you want or really can afford. These machines are costly at the best of times and if you break them, you’ve wasted a lot on something that lasted two minutes. Using a CO2 laser cutter can be easy but you do have to ensure you take some time out to put in some practice. Practice will make your life easier.

Stay Safe

Laser cutting machines are great because they can be used on a thousand different things and they really offer so much too. However, there are many who honestly get hurt simply because they didn’t take the time to practice using the machine. You might think practice isn’t really necessary and yet it will make potentially all the difference. Get some practice before you use your new laser cutter.  Always be sure to read reviews of the company you purchase from and strongly consider the technical support aspect into your purchase equation.  You can find reviews from forums, third part websites, and blogs like here:  Getting a good, well rounded consensus from several sources should give you a clear picture of the product and the support behind it.

Fun Things That You Can Do With Your Laser Cutter

Laser cutting technology has become much more affordable and popular over the last couple of years. The multitude of uses for these cutters is attributed to the growth in popularity. The fact that many people want custom things cut and their name plastered all over everything certainly does not hurt. Those people who tend to like taking on projects of their own will simply need a cutter of this type in order to do the best work possible. The following are fun things that you can do with your laser cutter.

Those who love putting together miniature models of anything need the precision of a laser cutter. One dimension being off can lead to hours of more work that could have been avoided. Try to see how much time one of these cutters saves you compared to manual cutting. It will be staggering to say the least and your possibility for error will be reduced immensely.

People tend to want their names on nearly everything from a Chaco bag to their phone case. Being able to engrave nearly anything can make a boring gift into something that someone will cherish.  You can check out some affordable laser tools out there like Laguna tools for example who offers cheaper imported tools.  This can also be great for parents who have children who lose nearly everything they take out of the home. Not only is this an investment that can help you give better gifts but it can save money in the case of a forgetful child.

Taking on home renovation projects or DIY projects will be easier than ever with this cutter. Precision is the name of the game when it comes to renovating so you should still measure twice and laser cut once! Those who take on quite a few of these projects should know that these are more durable than mechanical cutters. Lasers will not wear out so you need to think about this as an investment in your DIY hobby.

As you can see laser cutters offer a wide variety of things to do personally and professionally depending on your job. Take the time to see how many more things you can do with this versatile tool, you won’t regret it!  It’s amazing how affordable laser technology is now.  Even if as a DIY or small business you can afford it a lot more today.

What’s a Laser Engraver, and What Can You Do with One?

A laser engraver can be used to create an array of objects. Those who are into arts and crafts might not know how helpful engravers can be. This article will give you more insight on the product and how it can improve your next project.

What Is a Laser Engraver?

A laser engraver machine can be thought of as three main parts: a laser, a controller, and a surface. The laser acts as a pencil and it allows the controller to trace the pattern onto the surface. As you can tell by the name the controller controls the speed, direction, intensity, of the laser beam as it is being spread onto the surface.

What Can Be Engraved?

Before you decided to engrave your latest project, take a look at the following items that are able to be engraved with the laser engraving machine.

  • Natural materials- Hardwoods like walnut, mahogany, and maple can be engraved with a laser power of less than 10 watts. Engraving softwood can be tricky as the art is likely to vaporize. It can be done if the engraver has a fan blowing directly on it, is at its lowest power and quickest speed of cut, and enough airflow to extinguish fires that are trying to ignite.
  • Plastics- Standard cast acrylic plastic generally works well with laser engravers. Any signage and face plates can be engraved as well.
  • Metals- Coated metals, stone, and glass can be used with a laser at levels of 10-30 watts.
  • Jewelry- Jewelry is the most popular item that people want to engrave. A laser engraving machine can customize any piece of jewelry.
  • Fine art- As mentioned in the beginning of this article fine art is the perfect candidate for an engraving machine. Artist can digitize drawings or scan them and place them on any material that is compatible with the laser machine.

Where Can I Get One?

Laser engravers are relatively easy to find. EBay and Amazon are the top sites that consumers visit to purchase laser engraver machines. There are also plenty of companies that sell the engravers directly from their site. Before purchasing it is always best to do research on the type of engraver you will need to achieve the best results. Although the machines can be pricy and your first instinct will be to go with the cheaper one, make sure that the quality of work that it will produce will be up to your standards.

Laser engravers can bring a special touch to a lot of items. A normal ring can turn into a customized display of affection that a loved one will cherish for years. It can also be a great way for an artist to brand their work by engraving the logo into the merchandise. No matter what the use may be the right laser engraver machine and proper use makes all the difference. They are simple to use and even a novice will quickly pick up the technique.

Fun Hobbies For Your Laser Cutter

Laser cutting machinery has really become a popular tool of late and it’s not difficult to understand why that is. Cutters are multipurpose and versatile too; they are not only a smart tool for many craftsmen but also hobby enthusiasts. However, if you like the sounds of a laser cutter but aren’t overly sure what you can do with it, read on and you’ll find a few hobbies to sink your teeth into. Checkout latest information at this article.

Creating Models

If you are someone who likes to be creative and loves to design models then a laser cutter is the tool for you. With the cutter you can create amazing 3D models all from the comfort of your home and it can be super easy to add some personality into the models too. These can be as unique as you want and as big or small as you like too. Creating models from metal or other materials might seem like a real challenge, but with a good and reliable laser cutter, it is far simpler.

Engraving Personalized Name Plates

Name plates are very simple tools and yet they are super popular. Everyone wants their own fancy name plate and buying a plain one from the shops can be a bit boring. However, with a fiber laser cutting machine you can design your name plate however you like. Plaques are also great things to create and it’s super easy too. Once you have your materials ready you can use the cutter to cut your plaque out in the size you want. Then you can personalize the plaques with your special engraving. This can be a lot of fun and it doesn’t take that long either. If you have a lot of fancy skills then you can be as creative as you like and you can enjoy this so much.

Crafting Homemade Jewelry

Designing jewelry at home can be extremely fun, but often challenging, depending on how creative you want to get. However, with a laser cutter, you can actually find this to be far more enjoyable and simpler! The cutter can assist you in creating wonderful pieces of jewelry and you can personalize however you like and make them unique, one-of-a-kind pieces. This is why thousands are choosing to use laser cutters and they truly are some of the best tools available.

Sewing Fabrics At Home

Laser CutterIf you are someone who often likes to work with fabrics and create new curtains and cushions, the laser cutter can be an excellent tool to use. Now, of course, this isn’t exactly going to sew fabrics together, but if you want to make unique cushions with certain attachments, such as flowers, then the cutter can be used to cut the materials. This is a great idea and it’s certainly a great way to make your home more personalized. Read latest news and information at

Laser Cutters Can Be Your New Best Friend

The great thing about laser cutters is that now they are quite affordable, versatile, and great for DIY types as well as big business. So they aren’t just suited to the hobbiest in the garage. They can be used in a variety of ways and since they come in big and small sizes, you can find one that fits into your home perfectly. Check out the laser cutter prices here:  Overall lasers represent some of the best tools and if you’re someone who’s interested in creative arts a laser cutter might be the tool for you.  You can go expensive with an RF or metal tube or buy a value or more affordable glass tube laser cutter.

Advantages of Laser Cutters over Mechanical Cutters

For decades traditional mechanical cutters were widely used, but as times have changed, there is a bigger need for more modern technology and the CO2 laser cutter is that new tool. However, for thousands, they aren’t overly convinced these newer cutters are the best method, so are they? Read on and find a few simple advantages of using the laser cutters rather than the mechanical ones.

Better Finishing

You might not think there is any difference to the finish of a piece of metal that has been mechanically cut and one that has been laser cut but there are some very small and subtle differences. For starters, the laser burns through the metal leaving no sharp edges behind and secondly there is no warp distortion at the end of the cutting process. That is why a laser cutter machine has really become popular of late.

Lasers Don’t Wear Out

Regular steel blades are sharp and very powerful but after some use they can tire and get worn out. However, most people don’t really notice the blade is worn out and as a result, they use the blade leaving an uneven finish. If you are cutting several pieces of metal that are supposed to be all even in length and shape then there will be some dissimilarities. This is of course bad for manufacturers as it could mean rejection. A CO2 laser cutter on the other hand, can offer long-lasting wear. These don’t tire and don’t get worn so they are less likely to cause errors.

No Cross Contamination

Another issue with mechanical cutters is that while they are powerful and can cut a variety of materials, they can sometimes cause cross contamination. You wouldn’t think this would be very important, but it can be and those little particles left behind on the blade can cause errors with other cutting work. The laser cutter machine doesn’t pick up particles from previous metals being cut and that will prevent cross contamination.

Versatile With Endless Opportunities

Laser Cutters over Mechanical Cutters
Laser Cutters over Mechanical Cutters

A CO2 laser cutter is quite unique in a sense as it can handle whatever is thrown at it. There aren’t many cutters including mechanical cutters that offer this so it’s a real treat. However, it can create lots of shapes which prove its versatility and secondly it also proves you can use this with anything.

Before buying you need to compare prices and review not only the machines the sell but the support they give.  Look at how employees feel about the company. Example here of a laser company with lots of negative feedback:  full spectrum laser reviews.  There are no end of opportunities with this and it can eliminate rough edges too so that again is important. This has a lot of uses and it does make it far more appealing than ever before; it may cost a little more than some of the average cutters, but again, it offers so much. Learn additional tips at

The Laser Cutter Machine Can Be the Tool for You

A lot of people are put off the idea of modern tools such as laser cutters as they appear far too technical and expensive. However, these aren’t as costly as you’d think and since they can handle a variety of cutting tasks, they may make the process far simpler. A CO2 laser cutter is truly a wonderful tool to have in manufacturing plants and even at home! If you’re looking for machinery in general that can process metals find one here: laser cutter.

Advanced Laser Cutters – Make Your Work Easier!

A laser cutter machine has become a very highly sought after tool for skilled craftsmen and hobby enthusiasts. For most, they use this to help them laser cut into a variety of materials and it can be used in a hundred different arts and crafts project. However, these cutters are absolutely fantastic and they can make your work far simpler too. There is no better tool than a laser cutter. For more details, visit their official website.

Versatile For Any Material

One of the best reasons why laser cutters have become vastly popular is simply because of its versatility. Now, a cutter can in fact deal with a variety of materials such as metals, glass, stainless steel, paper, fabric and a lot more. That is amazing as it helps you to create some fantastic items at home and make them a little more personal too. These cutters are really useful and since they can handle a lot of delicate materials they can be used with a variety of woodwork and craft exercises.

Less Space Required

Space is an issue for most people and for those setting up a small business at home or taking up a new hobby, they don’t want to use what little space they have storing an overlarge tool. However, cutters aren’t exactly huge items; yes they can be fair in size, but they are actually a lot more compact than you would think. Most advanced laser cutters aren’t actually too big and this can be used in smaller and larger homes. If you are someone with less space you will be hard-pressed with using cutters but these aren’t too big. They can in fact make your work far simpler and it’s going to be a welcomed addition to your home too.

Affordable and Reliable

Advanced Laser Cutters

If you are interested in a laser cutter machine, you will find these to be far more reliable than many other tools. There are lots of engraving and laser cutting tools that claim to be very powerful, but many of them aren’t. However, laser cutters are in fact very useful and powerful too. You will find them to be very reliable and that is crucial as they can handle every material thrown at it. Also, this is really quite affordable as well which is hard to find today. You don’t often find these tools to be cheap but you don’t have to buy them outright or you can pick them up cheaply if second hand. Need more information? go to

Use the Best Tools Available

Advanced laser cutters might not always appear necessary; however, they really do make a thousand tasks far simpler. This is why there are more and more people today now using these and they really can offer so much too. Of course, you probably would think they aren’t really needed, but if you are someone who is into arts and crafts and who wants to make their lives far easier then the advanced cutters are great. You can really find using these to be simple and laser cutters are fantastic tools for almost everyone.  Be sure to talk to other machine owners prior to purchasing a laser.  GCC LaserPro Reviews is one resource to review a laser company – among others.  FS Laser Reviews also has customer feedback on their machines.   With both I saw that they offer lower priced machines compared to Epilog or Universal.